Nintendo Switch Lite Grip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made the grip for the Lite by rescaling my grip for the regular Switch based on published size data.
- Ocena
- 4,95 / 5
- Polubienia
- 499
- Pobrania
- 4563
- Wydruki
- 21
- Wyświetlenia
- 24 385
- Oceny
- 20
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
I made the grip for the Lite by rescaling my grip for the regular Switch based on published size data. I don't own a Lite but Bacon26 and Dumpe (thank you) tested it and I corrected the size accordingly. The current size would be very tight. Scale x (and only x) to 100.5% for a semi-tight fit. If you want to use a protective tape (e.g., electrician's tape) on the side, you should scale x to 101%.
Print instructions
Category: Video Games Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: No
Supports: Yes
Resolution: 0.2mm
Infill: 25%
Notes:
Print in PLA at 205c for a strong layer bond. Be sure to use at least 8mm of brim and support (65 degrees everywhere will do). You may need to rotate it to fit on your bed diagonally.