Prusa MK3S+ RHD Fan Shroud Duct revC
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
modifed to fit the Prusa MK3S+
- Ocena
- 4,625 / 5
- Polubienia
- 47
- Pobrania
- 316
- Wydruki
- 9
- Wyświetlenia
- 1912
- Oceny
- 8
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
The original fan shroud was not created be me. Link to original upload
https://www.thingiverse.com/rh_dreambox/designs
https://www.thingiverse.com/thing:3249344
CAD model is done in OnShape and can be viewed here
I attached a technical drawing (pdf) if you are interested in the positioning of the fan shroud.
The fan shroud works very well. The fan should be dialed done for better layer adhesion. So far I usually used half of the fan speed default values used in Prusa Silcer and worked great.
A picture of the overhang test shows: left stock mk3s+, right this fan shroud. Printed with same filament spool and same gcode. The overhang test is linked in remixes.
Fitment: Prusa MK3S+ Only
Material: ABS/ASA for shroud, PETG for support brackets
Standard Prusaslicer settings, No supports needed.