BLV MGN CUBE - SFU1204 Z axis bed mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bed mount for the "BLV MGN CUBE - SFU1204 Z axis by Cpt_Obvious" for two Z Ball Screws. Using the Stock Rail and the…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 731
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Bed mount for the "BLV MGN CUBE - SFU1204 Z axis by Cpt_Obvious" for two Z Ball Screws. Using the Stock Rail and the stock aluminum frame.
As compared to the original mount this is only one piece.
Mount it:
- Mount the Upper BK10 Bracked
- Mount the Lower Motor mount
- Put the ball Screw in trough to the bed holder
- Mount the bed holder to the Z carriage (do not insert the ball screw mount yet!)
- Mount the ball screw
- Mount the bed to the bed mount
It is quite a hazzle to put this thing together as you have to mount everything "in-place".
For this effort you get a ringgit bed which is not moving anymore!
Print Settings
Printer:
BLV MGN
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament:
Prusament PLA
Pearl Mouse
Category: 3D Printer Accessories