[IOT] Slush ice shaker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy way to create slush ice with your fridge. The bucket is designed for an German ice brand "BUSSY Kratz Drink".…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 251
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An easy way to create slush ice with your fridge. The bucket is designed for an German ice brand "BUSSY Kratz Drink". The content will be shaked 180° to keep the fluid in movement. This will just form some small ice crystals, it won't freeze trough.
The IOT stuff is not needed at all. You can use a micro controller of your choice. When you like to use the IOT stuff, make sure you have internet connection in your fridge :). The Arduino projects uses Thingspeak.
For a minimal setup you will need: (no affiliate!)
2x 608Z Bearing: LINK
1x SG90 Micro Servo: LINK
1x µController of your choice
Arduino project repository: LINK
YouTube Video: LINK
Aliexpress links (no affiliate!)
1x BMP280: LINK
1x SG90 Micro Servo: LINK
1x NodeMCU v3: LINK
1x NodeMCU Base: LINK
2x 608Z Bearing: LINK
Connections for NodeMCU v3:
SG90 Micro Servo: Orange = PIN D5, RED = 5V constant, BROWN = Ground
BMP280: VIN = 3.3V constand, GND = Ground, SCL = PIN D2, SDA = PIN1
Category: Kitchen & Dining