Alphabet squares
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple square tiles with letters on them. 26x26x3mm with 1mm raised lettering. After slicing, I edited the gcode to do…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 304
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Simple square tiles with letters on them. 26x26x3mm with 1mm raised lettering. After slicing, I edited the gcode to do a filament swap so that I could print them in two colours.
You can arrange them anyway you like on the bed, no supports required.
I made these to play some simple word games, but they have all sorts of possible uses!
Print Settings
Printer:
Geeetech i3 Pro B
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Notes:
Nothing special here, but I used a filament swap (M600) gcode commands to change from white to black filament, allowing the letters to be printed in a different colour from the tile.
Category: Games