Illuminated Heart Picture Frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Illuminated Heart Picture Frame where you can put in 2 Pictures. The Heart is splitted into 4 Sections, for each…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Illuminated Heart Picture Frame where you can put in 2 Pictures.
The Heart is splitted into 4 Sections, for each Picture it has 2 Sections which can be illuminated seperately.
As controller an Arduino Nano v3 is used. It controls 25 WS2812B. As Inputs there are two switches and one motion sensor, which increases the brightness when a motion is detected.
The electronics has its on case on the back. It is pretty compact, no nice cable management :)
The Faceplate is CNC-Milled to get a better surface.
Controller: Arduino Nano v3
LEDs: WS2812B on Individual Boards.
Switch: SS13D07G4
Motion Sensor: HC-SR501
Unfourtuanely i cannot find the Arduino Project anymore. It is nothing special at all. I was just using FastLED with standard Palettes to control the LEDs as an LED String.
Videos: Video 1 Video 2 Video 3 Video 4
Category: Decor