FGC-68 TMC Hi CAP adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a adapter that can be used with the standard TIPX lower
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 31
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
this Hi cap adapter does work. but you have to keep in mind that there is more of a chance for a mis feed. if there is something not right. since the mag haves to push 5 more paintballs up then normal. so it’s maybe pushing the limit of the spring a bit. but it worked for so far I have tested it.
do keep in mind there is also a TMC lower in the works that one have to push only 1 extra round up. so that should be more dependable.
but the nice thing about this one is that it’s flexible on the fly TIPX, T15, TMC all chanced out as fast as you can reload basically…
ABD installation video:
https://www.youtube.com/watch?v=5IxGVSHOZ00&t=3s
this part is need so you will not lose those 4 paintballs every time you do a reload.
parts needed:
1x M2 bolt in a length of 20mm (mag release paddle)
1x m2 bolt in a length of 16mm (mag catch)
spring mag catch 6mm OD, 10mm long, 0.6mm wire
ABD parts:
metal pin you may like to add a bit of super glue so it doesn’t slide out
spring 4mmOD, 5mm long 0.4mm wire
for more parts look at this collection:
FGC68 MKI
https://www.printables.com/social/180009-untangleworks/collections/88907
FGC68 MKII
https://www.printables.com/social/180009-untangleworks/collections/88908
videos about the FGC68 Hi CAP TMC
https://youtu.be/cSBZL6h9LCE