Narrow (double) stand for 75mm Integrated Auto-Rewind Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a more narrow stand for the Integrated Auto-Rewind Spool Holder to fit more spools into the same space.
- Ocena
- 5 / 5
- Polubienia
- 74
- Pobrania
- 465
- Wydruki
- 7
- Wyświetlenia
- 5730
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
I wanted to have a more narrow version to install 5 spools beside each other in the available space. Since the printer had enough printing space to produce two stands at once I decided to handle pairs with a double stand, causing the setup to be a bit more robust than using several single stands.
Rafts: No
Supports: No
Resolution: 0.2mm
Infill: 20%
Filament material: PETG
I rescaled the original STL files to get the desired size. To avoid trouble at the place where the axle connects to the stand I only scaled the middle part of the stand. The double stand simply is two single stands attached to each other in a single STL file. All the scaling is done in an OpenSCAD file attached. Feel free to modify it for other sizes.
Meanwhile, I replaced this design in my dry box with https://www.printables.com/model/450740-auto-rewind-spool-holder-for-drybox