Ender 3 Power Supply Case for small Meanwell LRS 350-24 power supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
modified case for Ender 3 printer with a Meanwell power supply and add a USB-connector for powering a Raspberry Pi
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 146
- Wydruki
- 1
- Wyświetlenia
- 1582
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I installed a new Meanwell LRS-350-24 power supply on my Ender 3 and needed a new mounting case to fit the smaller power supply. Additionally I wanted to connect the Raspberry Pi with a QC 3.0 USB-power supply. These things are for ships, trucks and cars but work fine with the empty 24 V input of the Meanwell.
The case is mounted from the side to allow a second z-drive on the Ender 3. Simply use M3 bolts and T-nuts. The power supply is fixed with two short M4 bolts to the case.
And, if you do not know anything about simple electrics, please leave the printer unchanged :-)
V2: case for power supply and USB-output
V2.1: like V2 with an additional mounting hole for a switch