1 / 5
Better WiFi - BT Home Hub 5 \ Plusnet Hub One wall mount bracket — zdjęcie 1
1 / 5

Better WiFi - BT Home Hub 5 \ Plusnet Hub One wall mount bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The popular UK BT Home Hub 5 \ Plusnet Hub One router (they are identical apart from colour) has small feet on the…

Ocena
0 / 5
Polubienia
4
Pobrania
101
Wydruki
0
Wyświetlenia
519
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

The popular UK BT Home Hub 5 \ Plusnet Hub One router (they are identical apart from colour) has small feet on the bottom, but no way to wall mount it with screws.

Given that the height of a wireless router significantly affects the WiFi reception I decided to design one.

This bracket has two slots that the original feet of the router slide into (friction fit) and then two 3mm holes for screws above that. The bracket also gives enough space for the power, ethernet and phone cable to come out behind the unit and be routed down the wall, preferably in self adhesive trunking for neatness (eg. https://www.toolstation.com/mini-trunking-3m/p28509 )

Note: STL dimensions are in metres, you may need to downscale by 1000 depending on your slicer.

Print Settings

Printer:

TronXY P802MA

Rafts:

No

Supports:

No

Resolution:

0.2mm layer height, 0.4mm nozzle

Infill:

30%


Notes:

This is a functional item so plenty of perimeters and minimum infill of 30% for strength. I printed in PLA+ but I'm sure other similar materials would work fine.

Category: Household

Tagi