folgertech ft-6 idler stiffener kit
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
i bought a folgertech ft-6 and after a few prints i noticed that the original belt idler pulleys where not straight…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
i bought a folgertech ft-6 and after a few prints i noticed that the original belt idler pulleys where not straight and where destroying the idler wheels. so i have designed this simple part that bolts to the frame and with a longer m5 bolt straightens the bolt up.
what is needed for mounting.
2 x printed stiffener
2 x m5x 35mm or longer bolts
6 x m5 locking nuts.
4 x washers
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
150
Infill:
20
Filament: spectrum filament PLA military green
Notes:
make sure that there is enough walls and that the top flat part is facing the buildplate when printing.
Category: 3D Printer Parts