Marvel United Card Trays (Season 1 and 2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Card tray to store the Marvel United character cards and villain dashboards in the Season 1 and Season 2 core boxes
- Ocena
- 5 / 5
- Polubienia
- 77
- Pobrania
- 724
- Wydruki
- 6
- Wyświetlenia
- 6397
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Vertical card storage for character and villain cards for Season 1 and Season 2.
Note: If you want a solution for storing your minatures see my other model: Marvel United Miniature Storage
Card sleeves
These trays have a 67.5mm wide card rows. Make sure your sleeves are narrower than this (should be most card sleeves). I used “perfect fit” or “inner sleeves” on mine and was able to fit both seasons in two boxes. I'm not sure how well thicker sleeves would fit.
Versions
There are two trays included:
- “card-tray” - This has three full vertical rows and three shorter horizontal rows for cards
- “card-tray-villain” - This has three full vertical rows and a seperate spot to hold the villain dashboards
Printing
This tray is 250mm x 250mm and designed to fit in the core boxes (with lid lift). I have provided files for printers that can print the entire thing at once, as well as split files for printers with smaller print beds
- card-tray-full - Use this if you can print the entire tray at once
- card-tray-split-(bottom-left, bottom-right, top-left, top-right) - Use these files and glue them together if your printer has a smaller than 250mm bed size
Card Dividers
The card dividers I used in the photo above are the amazing work done by spiff and are available on BoardgameGeek:
