Arrma Granite/BigRock/Typhon 3S Wing Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These should work with the Arrma Typhon 3S wing mount and the upper is modeled for fitting the Typhon 6S wing and…
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 2743
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
These should work with the Arrma Typhon 3S wing mount and the upper is modeled for fitting the Typhon 6S wing and Kraton wing. I have not fitted it to the Typhon 3S wing.
There is a 10 and 16mm variant.
The 10mm works with the granite using the Typhon 3S body mounting parts and the 16mm will hopefully work with the original granite posts.
Print Settings
Printer:
P2020
Rafts:
No
Supports:
No
Resolution:
0.26
Infill:
20%
Filament:
Sainsmart TPU
Black
Notes:
I use the same settings as PETG, just with a different temp (210)
Solidworks
In the SW file, just change the height in the drawing of the first extrude.
Category: R/C Vehicles