Ammo by Mig Pegboard Paint Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pegboard paint rack for Ammo By Mig paint bottle. Similar dropper bottles used by vallejo should also fit. I only have…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 209
- Wydruki
- 1
- Wyświetlenia
- 1117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pegboard paint rack for Ammo By Mig paint bottle. Similar dropper bottles used by vallejo should also fit. I only have Ammo by Mig paints at the moment so if you try another brand please let me know if they fit so I can update this page. Designed for use with 1/4" hole pegboard with holes spaced 1" apart. Slots for holding paint have a diameter of 1.01"
Print with supports and a raft for best odds of success. Increase the allowable unsupported overhang angle in your slicer so that not alot of support is wasted on the inside slots. Supports generated in the slots should pop out easy with a screw driver. Pegboard tabs may need to be cleaned with a file after the supports are removed.
Check out my other pegboard paint rack for Tamia 1/3 oz jars and mig washes here: https://www.thingiverse.com/thing:3316907
Print Settings
Printer:
Anet A8
Resolution:
.3
Infill:
20
Notes:
In Cura I used Cubic Subdivision. This should generate a solid line of infill that goes from the body of the rack into all of the pegs for added strength.
Category: Organization