Cal Kestis' Fallen Order Lightsaber - Xenopixel compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cal Kestis Fallen Order lightsaber with working xenopixel/neopixel internals.
- Ocena
- 4,5 / 5
- Polubienia
- 112
- Pobrania
- 616
- Wydruki
- 2
- Wyświetlenia
- 4562
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
This is my heavily modified version of Fordoprops' Cal Kestis Fallen order lightsaber which is now compatible with the Xenopixel Chassis. If you would like to purchase the Chassis have a look at Viresabers, Padawan Outpost, or Dark Wolf Sabers Websites.
You will see that there are holes on the shrouds, these are used for alignment but once secured you can fill and smooth.
Supports are only necessary on the shrouds and windows of the emitter.
This model requires four M3 screws and two M3 nuts. Make sure you block out the M3 nut supports inside of the emitter as they will be impossible to remove after printing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
15
Custom Section
Category: 3D Printing