Holocron Lightsaber Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed a base for CaseStudyno8's Cal Kestis lightsaber. This is inspired by the holocron in which Cal searches for…
- Ocena
- 5 / 5
- Polubienia
- 76
- Pobrania
- 251
- Wydruki
- 4
- Wyświetlenia
- 2202
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I designed a base for CaseStudyno8's Cal Kestis lightsaber.
This is inspired by the holocron in which Cal searches for throughout the game. The inner section can be printed in a different colour (in my case silk blue) to give it an interesting look.
The left peg is 3mm higher than the right as it fits into the cutout in the middle of the lightsaber.
I finished mine with gold Rub n Buff.
22/07/2021 - I updated the left peg's arms to be the same length as it was causing issues. It's a straight cut as I don't have the original file.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
10
Filament: Eryone PLA black/silk blue
Notes:
The outer section is .2mm larger for a press fit. The top and pegs can be secured with superglue.
Category: 3D Printing