tenoko band
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I removed the wristwatch band so that it could be attached to the back of my hand. I needed to output with as soft a…
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 497
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I removed the wristwatch band so that it could be attached to the back of my hand.
I needed to output with as soft a material as possible, and I output with TPU.
Output 4 attached pins and use as follows.
2 pins for fixing the watch
2 pins to stop the band
The title "tenoko" is the back of the hand in Japanese.
Referenced work: https://www.thingiverse.com/thing:4164771
I referred to using a pin as a fastener.
thank you.
I hope it helps you
Print Settings
Printer:
Geeetech i3 Pro B
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Filament:
Other TPU
yellow
Category: Accessories