800 GPH Bilge Pump Strainer (Invincible Marine) w. optional mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created and shared in OnShape This is a replacement strainer (screen, filter, etc.) for an Invincible Marine 800 GPH…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 26
- Wydruki
- 1
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Created and shared in OnShape
This is a replacement strainer (screen, filter, etc.) for anInvincible Marine 800 GPH Bilge pump with float switch. It probably also fits many other brands.
There are two versions. One is just the strainer, very similar to the original. The other includes a side mount so that those of us with aluminum boats need not drill through the hull (creating a viscous feedback loop) and can rather use a transom reinforcement rib.
I've printed in PLA and if that last that's how I'll leave it, but something less brittle and with better temperature tolerance might be better.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
.32 mm layers
Infill:
20%
Filament:
EryOne PLA
Notes:
Used a 0.8mm nozzle.
Onshape.com
Category: Replacement Parts