Sticker Roll Dispenser 61.5mm (2.25 inch) v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Second edition shows spool with stickers remaining, includes ramp for catching dispensed stickers
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 169
- Wydruki
- 4
- Wyświetlenia
- 1317
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my second take at a sticker/label dispenser. It's designed around 2.25" x 1.25" thermal stickers (approx. 61.5mm wide). There's a spindle for winding up your sheet of stickers, and one side of the body screws to the other using 3x6x5 heatserts and 3mm screws. The spindle includes an integral ¼" (6.5mm) square drive which you can use to load your sheet of stickers onto the spool.
I printed with supports on build plate only, using 4 perimeters to ensure good adhesion for the heatserts, .35mm layer height. I printed with Prusament PLA and it looks great to me! Happy making.
The plated 3mf is offset to the left because I have a tear in my PEI sheet.