Jack in the Box Turner for Assistive Switch Users
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn your Jack-In-The-Box handle with a simple DC Motor! This turner prints in two parts and will hold a small DC…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 399
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Share Alike
Turn your Jack-In-The-Box handle with a simple DC Motor!
This turner prints in two parts and will hold a small DC Motor (in a micro-servo body) in the right position to turn the handle.
A complete guide is in the works at ATMakers.org, but the basic are...
Print both the handle and body in PLA (or whatever you have - no real drivers on material)
Wire 4.5V through a 3.5mm (mono) jack to the motor
Attach AT Switch to turn on the motor.
Here's a video showing it in action: https://www.youtube.com/watch?v=OEFSgMxn5rk
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
.20
Infill:
30%
Notes:
Print is quite simple. You may have to drill out the mounting holes for the motor depending on your print quality - other than that i's an easy print.
I turn on the supports for the tower, but it would probably print fine without them.
Category: Toys & Games