1 / 1
Food dehydrator tray extension for 275 mm (10.8 in) or 330 mm (13 in) dehydrators — zdjęcie 1

Food dehydrator tray extension for 275 mm (10.8 in) or 330 mm (13 in) dehydrators

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tray extension for non-branded food dehydrators which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they…

Ocena
4,6 / 5
Polubienia
52
Pobrania
298
Wydruki
5
Wyświetlenia
2442
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Public Domain

Tray extension for non-branded food dehydrators which are 275 mm (10.8 in) or 330 mm (13 in) in diameter, so that they can be used to dry filament. Please note that I have not tested the sizing of any of the 330 mm parts as I do not own a food dehydrator that size. Please let me know via comment or message if you have problems with these pieces.

It is split into quarters. One version has an M5 hole which you can screw a Bowden adapter into, another is solid, and the third has a space to mount a temperature and humidity gauge, which is also untested as I do not own one. Separate mounting pieces for the gauge are available for both sizes.

For the gauge reference I have used one with a 25 x 45 mm mounting hole such as this: https://www.ebay.com.au/itm/2x-LCD-Meter-Temperature-Humidity-Thermometer-Hygrometer-Vivarium-Reptile-BI701/262996361073?epid=20016010829&hash=item3d3bcdff71:g:8YIAAOSwPcBbMQIY

This version won't stack. If there is demand for a stacking version I can make one at a later time.

I recommend printing them with PETG or ABS in order to withstand high temperatures without deforming. However, these pieces are fairly thick and may hold up well if PLA is used.

If you're looking for a spool holder to use in your dehydrator, you can try this one that I made: https://www.prusaprinters.org/prints/20325-vash-vertical-axis-spool-holder

Print instructions

Brim highly recommended. No supports needed. High temp filament (e.g. ABS, PETG) recommended.

Parts shown printed in ABS at 0.20 layer height, 20% gyroid infill, and 4 perimeters.

Tagi