Spiral Award Trophy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a spiral sculpture that can be used as a trophy or an award for a gala event. The original version (2) had…
- Ocena
- 0 / 5
- Polubienia
- 57
- Pobrania
- 254
- Wydruki
- 0
- Wyświetlenia
- 1158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a spiral sculpture that can be used as a trophy or an award for a gala event.
The original version (2) had holes where the two elements fit together. The new version (4) fixed that problem by fusing the two pieces together for an airtight solution.
Please "like" this file if you collect or download it.
Here is a corrugated version of the trophy: https://www.thingiverse.com/thing:4646570
_________________________________________________
The resin print is available for purchase at the following website:
Post-Printing
Since the photos were taken I have applied clear epoxy. This can give it a high gloss finish and eliminate laying lines - careful this stuff can set really quickly depending the glue you get. There is also a variety designed for 3D prints.
Instructions
This does not need supports. Although the bottom facing surface ended up a bit rough. I printed it out at 14% infill and 4 shells at the finest resolution. It is recommended that you print this out at the maximum size for your printer (scale it to your needs).
The larger print in the photo is from an extended printer with a larger print volume - stopped the print mid way and changed colours.
Category: Sculptures