Bauhaus/Obi box clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just some basic Box Clamps I designed to make my filament storage airtight.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A while ago I bought a box from Bauhaus and found out that It wasn't airtight enough to hold my filament as I had intended I designed these clamps in Solidworks Myself and they work pretty well. I printed them out of red PET-G but you should be also able to make them out of PLA.
FYI: The little “Butt crack” at the bottom is there to make sure that the clamp doesn't slip off from the reinforcement ribs it presses on.
I'm uploading them as .STL , .3MF and .SLDPRT in case you would like to make your own modifications.
I hope you like them and thank you for at least opening this page.