Shaw BlueCurve / Arris TG4482 Modem wall bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This bracket allows you to wall mount a Shaw BlueCurve cable internet modem. (Technically the Arris TG4482)
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 1071
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
This bracket allows you to wall mount a Shaw BlueCurve cable internet modem.
(Technically the ARRIS Wireless Gateway TG4482)
Generically: Technicolor | CommScope CGM4331SHW | TG4482.
AKA: Fibre+ Gateway 2.0 (XB7)
Mount to the wall with #6 wood screws. Mount the base, place the modem, slide the ring over the top of the modem and secure to the wall.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.2mm (not required)
Infill:
100% (see note)
Filament: Priline 2021 PLA Black
Notes:
I actually set walls to 99 so it would print solid.
You can print with infill of 100% or less if you wish.
How I Designed This
Design
Fusion 360 free version
Digital caliper
Model the modem first then design the bracket around it.
Guesswork (fillet radii, etc.)
Trial & Error
Cut curved pieces from the design in Fusion 360 and printed the piece(s) to test fit on the device. Proceed if it worked, correct design and re-print if it didn't.
Category: Organization