BigBox Hemera with MGN12H Linear Rail
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mod to replace the X axis of the E3D BigBox with a linear rail and fit a Hemera extruder
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 452
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
* This is still a work in progress *
The goal of this upgrade is to replace the horizontal X carriage of the BigBox with a vertical MGN12 linear rail. And to do so with the least amount of additional parts possible.
You will need to buy a 400mm MGN12H linear rail and some M3x5 screws to mount the carriage to the block. I would also advise getting new GT2 belts (3m is enough).
But other than this you should be able to reuse what you will take apart.
You can find modified Marlin 2.0.9.3 firmware here : https://github.com/I-am-me/BigBox-TMC2130-RevoHemera-BLTouch
It is configured for my machine, with a BLTouch and TMC2130's but you can adapt it for yours.
As of this version you will loose about 30mm of Y bed space. I am currently working on an improved one where this will not be the case anymore.