1 / 2
Tweaked Base Lever for SRT V9 Gearbox + Shoulder bolt mod
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A couple of mods for the lever mod for easier printing and quality of life + a mod that uses smooth sliding bolts.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Moded Base Lever for the SRT V9 Gearbox:
Tweaks (see silver lever in picture):
- Re-modeled the switch nook so that it's easier to print and can easily mount the switch reversed to compensate for slack in the assembly
- Removed the cable loop for easier disassembly.
- Chamfered the spring slot so that it can more easily be printed and the spring transition in when being compresed.
- Chamfered other holes so that they're easily printed without supports or sagging bridges.
- Made the switch mount holes smaller so that screws can fit tighter
Shoulder bolt option (see orange lever in picture)
- Uses D5 M4x25 shoulder bolts for smooth sliding to reverse.
- https://www.aliexpress.com/item/1005003335259903.html (pick the right size, it's not pre-selected by default)
https://lebois-racing.fr/srt-gearbox-h-pattern-sequential
Discord
I picked a license here but it may be wrong, just follow the same license as the overall SRT gearbox because this is a mod of the original design by Lebois Racing, I didn't come up with it.