STAR WARS Logo Lamp

***UPDATE***

Some people got problems with the original version. You need a highly accurate/calibrated printer.

I've added new files with a higher gap/offset. Tested with a 0.6mm nozzle. If you struggle with the inlays, try the version with 0.4mm gap. This should work perfect for the most printer.

STAR WARS logo lamp

May the force be with you! This is yet another LED logo lamp with the STAR WARS logo, similar to my 
NETFLIX lamp. If you want to recreate this you'll need the following things:

-yellow + transparent filament for STAR WARS logo
-black (or colour you want) filament for the lamp case
-on/off snap in switch
https://www.amazon.com/TWTADE-Position-（Quality-Assurance-Years）XW-604BB1/dp/B07HHVTM7V/ref=sr\_1\_18?keywords=SPST+2&qid=1579096753&sr=8-18
-Female DC Power Jack Panel Mount with Hex Nut
https://www.amazon.com/TOTOT-5-5mm-Female-Socket-Electrical/dp/B077YB75N3/ref=sr\_1\_16?keywords=DC%2B2%2C1%2Bx%2B5%2C5mm&qid=1579096500&sr=8-16&th=1
-30cm LED Stripe 24VDC
-AC/DC Adapter, 24VDC/1A

1.Print the Case, back cover and the logo inlays
2.Print the logo and add a colour change for the last 5 layers
3.Put the inlays in the letters
4.Add LED stripes, DC Power Jack and the switch, connect the wires

Please let me know in the comments if you would like to see other design with other brands/logos.

Dies ist eine weitere LED Logolampe mit dem STAR WARS Logo, ähnlich meiner 
NETFLIX Lampe. Wenn du das nachbauen möchtest, benötigst du die folgenden Dinge:

-gelbes + transparentes Filament für das STAR WARS Logo
-schwarzes (oder Farbe deiner Wahl) Filament für das Lampengehäuse
-Einbauwippschalter
https://www.amazon.de/gp/product/B00WJLF8OQ/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1
-DC 2,1 x 5,5mm Buchse Einbaubuchse
https://www.amazon.de/gp/product/B00FWP5EYK/ref=ppx\_yo\_dt\_b\_asin\_title\_o03\_s00?ie=UTF8&psc=1
-30cm LED Streifen 24VDC
-AC / DC-Adapter, 24VDC / 1A
https://www.amazon.de/JRing-Stecker-Netzteil-Radiowecker-LED-Strip-Lichtleisten-schwarz/dp/B07HQL9JM8/ref=sr\_1\_fkmr0\_1?\_\_mk\_de\_DE=ÅMÅŽÕÑ&keywords=JRing+Netzteil+24V+DC+1A%2C+EU-Plug+5%2C5%2F2%2C1mm%2C+24W+Stecker-Netzteil+für+Radiowecker%2C+LED-Strip+Streifen%2C+Speedport%2C+Lichtleisten%2C+USB-Hub%2C+Switch%2C+Rout&qid=1579100558&sr=8-1-fkmr0

1.Gehäuse, hintere Abdeckung und Einlagen für das Logo drucken
2.Logo drucken und eine Farbänderung für die letzten 5 Schichten hinzufügen
3.Einlagen in die Buchstaben einsetzen
4.LED-Streifen, DC Buchse und Schalter einbauen, Kabel anschließen/verdrahten

Wenn ihr andere Designs mit anderen Marken möchtet, so hinterlasst eure Wünsche in den Kommentaren

Print instructions

Category: Signs & Logos Print Settings

Printer Brand: Prusa

Printer: I3 MK3S

Rafts: Doesn't Matter

Supports: No

Resolution: 0.2

Infill: 15%

Filament: Verbatim PETG black, Redline PLA yellow, Sunlu PLA transparent