Catan Holder Remixed Taller
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I really liked the design of the original holder but wanted to create more visibility when the cards were behind each…
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 1233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I really liked the design of the original holder but wanted to create more visibility when the cards were behind each other. I added 5mm difference to the card holders.
I also added a little depth to the settlements and cities holder to make it harder for my cat to steal the pieces.
Print instructions
Category: Toy & Game Accessories Print Settings
Printer Brand: Prusa
Printer: i3 MK2S
Rafts: Yes
Supports: No
Resolution: 0.15 mm
Infill: 20%
Notes:
I used a raft because my first print pulled away from the bed. This could have been caused by the printer not being fully enclosed and may not be necessary for most.
My total print time was 7 hrs 14 min