Bowens Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for softboxes etc. with Bowens mount
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 517
- Wydruki
- 1
- Wyświetlenia
- 2064
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
I needed to get some softboxes off the floor but didn't want to pack them all down, so I had to make a wall mount.
This is my first 3D design ever, so if you have any suggestions for improving it, I'd be happy to hear from you.
I have printed three of them yet, using 40 % infill, and they seem to be stable enough for my softboxes (one octobox ø 80 cm, and one 80 x 120 cm rectangular).
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
0.16 mm
Infill:
40 %
Filament:
Comgrow PLA
Notes:
Infill and bottom/top layers was just a guess, but it seems to work alright for me with 4 layers and 40 % infill. If your stuff is heavier, you may need to adjust this.
Supports can be a bit difficult to remove, but a long nose pliers helped me a lot.