Laptop Stand Smoother
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I bought the Nulaxy Laptop Stand laptop stand from Amazon, the https://www.amazon.com/gp/product/B07P54RSPY I really…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 434
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I bought the Nulaxy Laptop Stand laptop stand from Amazon, the
https://www.amazon.com/gp/product/B07P54RSPY
I really like the stand it's super solid. But I feel like the edges on the base are a bit sharp for sliding sensitive in the middle. So I made a smoother to cover the front of the base.
NOTE: LET THE PART COOL! The top of the model, which is face down to the printer when you print it, is pretty thin. If you pull these right off a heated bed, the (still warm) print may warp. After printing, let the bed/part cool down before removing it.
The edges have fillets/chamfers. These should print OK even at 0.2mm, but I printed at 0.15mm to better support (especially) the fillet.
Orientations of the .STL files should be "ready to print". A Fusion 360 export file is provided. Mostly parameterized.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.15
Infill:
15%
Filament: Prusa Prusament PLA, 1.75 Mystic Green How I Designed This ===================
Measure. Draw in Fusion. Revise. Revise. Revise.
Category: Office