Amazon Echo Dot Gen. 3 wall mount (flat base)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I liked the original design but I didn't need the large hole OR screw holes in the mounting plate, as I am mounting it…
- Ocena
- 4,75 / 5
- Polubienia
- 22
- Pobrania
- 194
- Wydruki
- 5
- Wyświetlenia
- 756
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
I liked the original design but I didn't need the large hole OR screw holes in the mounting plate, as I am mounting it with 3M Command adhesive strips.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
60%
Filament: Hatchbox PLA, 1.75mm White How I Designed This ===================
Imported the original designers .stl file into Fusion 360.rnConverted the model, Mesh to BREPrnI made a sketch on the bottom face of a circle SLIGHTLY larger than the original round basernI extruded the circle to the top of the round base.rnI cleaned things up just a bit, leaving the nice round base with the support legs still intact.rnI exported the model to .STLrnrnWhen I imported the .STL into Fusion 360, it imported it 10x too big (centimeters vs millimeters, I guess). I didn't notice this until I imported the model into PrusaSlicer. I've overwritten the .STL so it should work correctly for you.rnrnWarning: I've included the .STL and Fusion 360 export file. If you import my Fusion 360 model and re-create the .STL from Fusion 360, your model will be 10x too big (unless you scale the model in Fusion).
Category: Containers