FatShark Case for a LM2596 (Buck Converter) Power Supply
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case that is designed to fit in to the elasticated section of my FatShark goggles. It's really simple to use…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case that is designed to fit in to the elasticated section of my FatShark goggles. It's really simple to use - fit the buck converter in place, hot glue for stress relief on the wires and then use 2 - 3 cable-ties/zip-ties to fix the unit together. Just make sure that you've checked your voltages are right again before you plug your goggles in!
Here's a link to a video on the electronics side of things: https://youtu.be/EPyDTqh4-YQ
And here's the video on the OpenSCAD design side of things for those that would like to see all revealed: https://www.youtube.com/watch?v=tUUbTt4To04
Category: Electronics
