1 / 1
3D Printing Trophy: Stringing
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
Another in my series for makers to earn achievements for their dedication to 3D printing.
Model prints with no supports and with 10% infill. Optional panels are included if you want to print brown/wood covers for the model base.
This trophy is earned when you have these little stringy bits on your print. Don’t worry you can just cut them off and you’ll be fine, but you should probably check your retraction settings and maybe run a temperature tower.
Enjoy!