Ubiquiti rack mount USG, Cloud Key Gen 2 and Raspberry Pi
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my version on a Ubiquiti rack solution, it mounts a 3P USG with the Gen 2 Cloud Key with allowance for a…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 132
- Wydruki
- 2
- Wyświetlenia
- 2058
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my version on a Ubiquiti rack solution, it mounts a 3P USG with the Gen 2 Cloud Key with allowance for a network port on the front, and lastly a Raspberry Pi.
Printed in 3 parts and slid together using a dovetail style connection it goes together simply and very strong. This one i printed in ABS as the first version of the design in PLA was getting a bit droopy, PET-G or other higher temperature plastics would suit.
There are 2mm holes for screws for the USG to mount on as well as to screw the raspberry pi to. There is also a couple of holes at the back of the raspberry pi tray to secure the power cable with a cable tie.
Some of the honeycomb can be tricky to print with the large bridge required but print without supports.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
20%
Filament: Generic ABS Black
Category: Office