Stackable Rainbow Blocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Set of blocks I printed in different colors to look like a rainbow.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 279
- Wydruki
- 5
- Wyświetlenia
- 1138
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Set of blocks I printed in different colors to look like a rainbow. They have grooves in them so that they can be seated together pretty well.
Added April 2023: A cloud-like base piece that holds the complete rainbow
There are only 6 layer blocks, and I included two test pieces (innertest & outertest) I used to make sure that I was able to print the grooves correctly.
Print instructions
Category: Toys & Games Print Settings
Printer Brand: Anet
Printer: A8
Rafts: No
Supports: No
Resolution: .12mm
Infill: 10%
Notes:
I set Cura to use 4 walls to give them a really solid feel and to hide the infill from showing through. The largest block will need to be rotated to fit on a 200x200 bed, all others can be printed as they are in the .stl