Prusa Lack Enclosure Bottom Extension
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remix of the original Prusa Ikea Lack enclosure. It wasn't until I had cut the sheet of acrylic into the…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 866
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
This is a remix of the original Prusa Ikea Lack enclosure.
It wasn't until I had cut the sheet of acrylic into the dimensions in the guide that I realized my Anet AM8 printer would be too tall to fit into the enclosure.
This will add about12-13 millimeters (1/2") of vertical clearance to the enclosure.
These replace the following parts from the original:
- Prusa_Enclosure_Door_Knob.stl
- Prusa_Enclosure_Bottom_Corners.stl (only the bottom halves)
The number at the beginning of the file name denotes how many copies should be printed. Note: For the door knobs and front corners print one as is and another mirrored.
To create a channel for cables I simply cut down one of the 6 bottom side channel pieces with side cutters.
Print Settings
Printer:
Anet AM8
Rafts:
No
Supports:
No
Resolution:
0.2 mm
Category: 3D Printer Accessories