Simple square Pencil Holder - textured, no perimeters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Super simple square pencil holder, experimented a little bit with no perimeters on prusaSlicer to achieve texture.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Hi, this is my first model ever, I'm new in this 3d printing world and learning about tools and tricks.
The Idea in this pencil holder is to achieve some sort of fabric texture, in order to do that I played removing perimeters and using high % infill plus some PrusaSlicer modifiers.
Changing infill types and % you can create different textures.
I recommend printing with line height of 0.15, the current cover photo was printed with 0.2 and the finish is not that good, the second picture was one little box that I did to experiment, with 0.15 and the pattern is much better.
The end result is surprisingly resistant and elastic.
Notes:
- If you want to print a regular solid pencil holder, use the stl named “pencil_holder_square” and slice it in your favorite slicer.
- If you want to print the version with no perimeters you can use the gcode named “pencil_holder_square-No_perimeters-0.15mm_PLA_MINI_6h18m” or the .3mf file “pencil_holder_square-modifier_boxes” and slice it yourself.
- WARNING: I didn't test this on other printers or slicers (like cure), I printed in a mini+ and used prusaSlicer.
regards!