Lego 42125 Ferrari Wall Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall hook for the Lego Ferrari to hang it facing upwards, wheels against the wall but no compression of the…
- Ocena
- 5 / 5
- Polubienia
- 53
- Pobrania
- 525
- Wydruki
- 5
- Wyświetlenia
- 2041
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution
A wall hook for the Lego Ferrari to hang it facing upwards, wheels against the wall but no compression of the suspension springs.
The hook holds the car by a horizontal beam near the front, as indicated in the photos.
The holes are sized for 4mm diameter countersunk screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Infill:
30%
Notes:
You will need support if printed with the wall-face on the bed. The model is orientated this way by default.
Design Process
I started with a much stronger oversized hook that could have held a real Ferrari on the wall! I gradually reduced the size as I adjusted the compression of the car against the wall. This also reduced printing time and material needed. The 4th version was just right.
Category: Construction Toys