Eye for a Dalek mk3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Eye for a Dalek mk3 with white ring. Designed to fit onto a 30mm stalk.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 271
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Eye for a Dalek mk3 with white ring. Designed to fit onto a 30mm stalk.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20%
Notes:
The body can be printed face upwards, as orientated in the file, with 20% infill and support (needed for the first few layers).
The tube through the back is around 55mm deep and has a conical end at the top with 45 degree slopes, which should not require any support during printing. This fits an eye-stalk of 30mm, which matched the pipe on my model. The hole is slightly oversized and I used a few pieces of paper to wedge mine rather than glue.
I suggest enabling ironing with a concentric pattern to get the shiny front face.
Category: Robotics