Bearing Press Tools 63800 6802 6900 6902 Bicycle MTB
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bearing Press Tools for 6900, 6902, 6802 Bearings The files marked "Press In" are a remix of bikenerd tools. I just…
- Ocena
- 5 / 5
- Polubienia
- 112
- Pobrania
- 615
- Wydruki
- 2
- Wyświetlenia
- 4819
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Bearing Press Tools for 6900, 6902, 6802 Bearings
The files marked "Press In" are a remix of bikenerd tools. I just changed the numbering to be on the side so it could be bigger text.
The files marked "Press Out" are for pushing the pivot bearings out of the rear suspension and frame of a 2010 - 2012 Giant Reign. They are designed not to catch on the frame openings.
Files marked as "Cup" are to allow the bearing to be pushed out of the frame completely.
Use 8mm bolt for the 6802 & 6902 tools; 6mm bolt for the 6900 tool. Also use washers to help stop the tools crushing.
For pressing in the bearings, a C-clamp also works or a vice if you have one. Take care to have the bearing as straight as possible when pressing in.
Use minimum of 3mm for the outer layers and 2.2mm for top and bottom with 25% infill.
PLA worked quite well and didn't crush or break.
17/01/2022
63800 Bearing Press Tools added as request by Noel15
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2mm layer height
Infill:
25%
Filament: Any PLA, PETG etc Any
Notes:
3mm for outer walls
2.2mm for top and bottom layers
25% infill
Category: Hand Tools