DU Bushing Removal Tool Fox RockShox Shocks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock Originally I ordered a new DU Bushing…
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 207
- Wydruki
- 1
- Wyświetlenia
- 1272
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is for the 1/2" size DU Bushing for Fox and most other brands of rear shock
Originally I ordered a new DU Bushing (rear shock eyelet bushing) and the bushing tool for my mountain bike. The bushing showed up; but the tool never did.....
Decided to try printing one and found out that it work out quite well.
Pictures show the tool after I used it and so they are a little bit crushed.
Use a 4mm or 1/4" inch threaded rod with some thick washers.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
30%
Filament: ANY PLA Black
Notes:
Print with at least 1.2mm thick walls and 30% infill; but it maybe better to use thicker walls or 100% fill as mine crushed a little.
Category: Hand Tools