Turnigy Aerodrive SK3 3536 1400kV Motor Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor Mounts for the Turnigy Aerodrive SK3, 3536 size, 1400kV. Incorporates holes for the motor mounting screws. One…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 515
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Motor Mounts for the Turnigy Aerodrive SK3, 3536 size, 1400kV.
Incorporates holes for the motor mounting screws.
One is 90 Deg angle; the other has 7 Deg tilt off vertical.
Print with the motor side (the side with the big hole) flat on the bed.
No need for supports, print 100% fill (solid)
2nd Feb 2020 - Also just added a couple of more rounded off versions of the mounts; so they are a bit less draggy.
Print Settings
Printer Brand:
Anet
Printer:
A8
Rafts:
No
Supports:
No
Resolution:
0.15 or 0.2
Infill:
100% (solid)
Filament: Any PLA Any
Notes:
Use Brim if you are having problems with warping
Designed with OnShape
Category: R/C Vehicles