1 / 6
Prusa Mini MK3S Bear: Sherpa Mini + Revo Voron — zdjęcie 1
1 / 6

Prusa Mini MK3S Bear: Sherpa Mini + Revo Voron

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sherpa Mini extruder + E3D Revo Voron hotend (rigid mounted) for the Prusa Mini MK3S Bear Mod

Ocena
0 / 5
Polubienia
47
Pobrania
199
Wydruki
0
Wyświetlenia
3016
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Sherpa Mini extruder + E3D Revo Voron hotend (rigid mounted) for the Prusa Mini Bear Mod

I wanted to use E3D's Revo Micro with Prusa Mini Bear Mod in combination with Sherpa Mini extruder. I found the thread mount of Revo Micro to be fiddly and I did not really like it, so, as any sane person would do, I bought a Revo Voron heatsink :)) because of the rigid mount (and because it looks cool :D).

You need 6x M3x14 screws and 2 M3 hex nuts (in addition to what's needed for the Bear EXXA):
- 4 screws to hold the Revo Voron
- 2 screws & nuts to hold the Sherpa Mini

This mod is based on the BearEXXA extruder for the MK3S+ - thanks to the awesome Grégoire Saunier. 

Also huge thanks to pear3d.ch and Tomson for their work on the Prusa Mini MK3S Bear mod, they made all this possible.

It can be used on the MK3S+ as well, just print everything mirrored.