LayersFactory
Zgłoś model
1 / 1
Thrustamaster TCA VKB FSM-GA Adapter — zdjęcie 1

Thrustamaster TCA VKB FSM-GA Adapter

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

xA59rhR8FF

xA59rhR8FF

@xA59rhR8FF

Adapter to fit a VKB FSM-GA on top of a Thrustmaster TCA Throttle Quadrant.

Ocena
4 / 5
Polubienia
15
Pobrania
43
Wydruki
1
Wyświetlenia
2101
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
GNU General Public License v3.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (1)Kolekcje (18)Powiązane

Update

You might be interested in an awesome remix of this project done by X-Rush and available at this link. Their updates to this model:

  • Added support for the FSM-GA module to add stability and rigidity to the whole model.
  • Also changed the holes at the bottom of the rail to accept various screws (removed conical shape).

I encourage you to check out their model and compare to see which suits your needs best. Also, here's to remix culture, woohoo!

Original

This is an attachment for my previous project Thrustmaster TCA Quadrant Accessory Rail, to further enhance the throttle quadrant of the Thrustmaster TCA Captain Pack Airbus Edition and enable the VKB GNX Front Switchboard Module – General Aviation (FSM-GA) to be attached above.

To attach the FSM-GA to the TCA Quadrant, you'll need to do the following, choose from either STL (option 1) or 3MF (option 2)

  1. STL
    1. This Proejct
      1. 1x tca-vkb-adapter.stl
      2. 1x tca-vkb-adapter.stl (mirrored along X-axis to make a right side into a left side)
    2. Thrustmaster TCA Quadrant Accessory Rail
      1. 1x tca-acecssory-rail.stl
      2. 1x tca-accessory-rail (mirrored along X-axis to make a right side into a left side)
  2. 3MF
    1. 1x This Project
      1. tca-vkb-adapter-v3-both.3mf (containing a left and a right)
    2. Thrustmaster TCA Quadrant Accessory Rail
      1. 1x tca-accessory-rail-both.3mf (containing a left and a right)

PolyTerra black, 0.8n, 0.55mm layers, 4 vertical walls, 2 horizontal walls, 20% gyroid infill. If using a smaller nozzle consider adding 100% infill around the screw holes so that tightening the screws does not crush infilled space.

Created in TinkerCAD (link)