STUBBY SPANNER - 3D Printable Adjustable Wrench
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a remake of the fully print-in-place adjustable wrench by Daniel Noree. I was testing printer settings on his…
- Ocena
- 4,889 / 5
- Polubienia
- 39
- Pobrania
- 539
- Wydruki
- 10
- Wyświetlenia
- 1842
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This is a remake of the fully print-in-place adjustable wrench by Daniel Noree. I was testing printer settings on his wrench and didn't want to wait for the entire thing to print each time (all the important stuff is in the head/claw/mouth - whatever you call that - of the spanner) but I still wanted a nice looking design. So I shortened the handle and thus was born the STUBBY SPANNER.
I used the "longer screw" version of the original design and to get it to print without too much hassle (read: not fusing parts) I had to print it at 130% of the original size.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
No
Resolution:
130
Infill:
45
Filament: Sunlu PLA+ Orange
Notes:
The banana for scale in the photo is this thing: https://www.thingiverse.com/thing:409394
Someone else had same idea:
Category: Hand Tools