Le Transi de Rene de Chalon - The Skeleton
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a cleaned up printer friendly version of the scan by Three D Scan
- Ocena
- 4,5 / 5
- Polubienia
- 191
- Pobrania
- 822
- Wydruki
- 4
- Wyświetlenia
- 4854
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
Info
I really liked this statue and wanted to have a smaller version of it at home. I tried to print the original scan, but kept having failures on my resin printer. So I took some time in fusion and cleaned it up and made base of the statue flat so it would adhere to the print bed.
This is a huge model, so it's quite scalable for whatever printer you're printing it on.
The original scan can be found here: https://threedscans.com/musee-des-monuments-francais/le-transi-de-rene-de-chalon/
If you want to find out more about the statue you can go here: https://en.wikipedia.org/wiki/Cadaver_Tomb_of_Ren%C3%A9_of_Chalon
Printing
Printed it in two parts using the cut function is PrusaSlicer. Top took about 26 hours and bottom was 25 hours. Printed at 0.025 layer height with Elegoo ABS Like Gray resin. I painted it in primer white liked it too much to do anything more.
I uploaded the split version, this is what I used to get the most out of my SL1 print volume. Might make it easier for someone else so I've included them as well.
Supports, be careful!
Because the center of the chest is hollow, be mindful of the support placement. I printed a small full version which has a support structure stuck in the chest that I cannot get out.
Happy printing!