Summer Waves Polygroup SFS SkimmerPlus Skimmer Vacuum Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the Summer Waves SFS SkimmerPlus Vacuum adapter.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 958
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is the Summer Waves SFS SkimmerPlus Vacuum adapter. I also added a version that accepts an o-ring (size: R-11 recommended).
Supports are only only needed on the EXTERIOR of the intake and are suggested on the main dome. Add support blockers to the INTERIOR of the upper intake cavity and the INTERIOR of the intake spout, as the areas do not require support.
Recommend filament: ABS or ASA
Leaving post printed supports will give the part added strength without impeding performance.
Also included is a file for a protective shell, for those who have pools on a hard surfaces. This shell will help protect the skimmer from impact if accidentally dropped. It can be made using PLA and 35% infill, inner/outer wall count 5.
My adapter was damaged beyond functionality, when it hit the concrete during transfer, which is why I designed this shell. It has since saved me on more than one occasion from having to re-print my skimmer plate over again. It simply pulls off when the setup is in the pool, and locks back on again when finished, before removing from the pool.