Jacek torture - Simple printer benchmark 20 minutes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple test piece I made for my 3D printer. Prints in ~20 minutes on 0.3 layer, features different tests.
- Ocena
- 4 / 5
- Polubienia
- 3
- Pobrania
- 95
- Wydruki
- 1
- Wyświetlenia
- 459
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution
I recently got new filament for my prusa printer and was having trouble with default profiles.
XYZ cube doesn't feature any meaningful tests, and benchy is taking too long to print.
I needed something simpler that would let me see if everything is fine quickly, so I can change settings and try again.
This test features sloped overhangs, imho most important test cause if something is bad with the print/filament settings, it's gonna look very bad.
Beside that there is small bridging test, small diameter pole, thin wall test and text on top for checking small details.
It isn't a perfect piece to fine-tune/calibrate your printer, neither is this the hardest torture test available, but for daily use when you need to fiddle with your settings to get the new filament to work on overall properly calibrated printer → I think it is good to have a quick test to check lots of things at once.