247 Ft Arched Truss Bridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a complete rebuild of the 145 ft Steel Arched Truss Bridge by kabrumble. I also added rivets to the plates and…
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 299
- Wydruki
- 0
- Wyświetlenia
- 1601
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Architecture & Urbanism
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a complete rebuild of the 145 ft Steel Arched Truss Bridge by kabrumble. I also added rivets to the plates and added inside plates that print separately.
All of the sections needed to be resized to create the proper arch. Also the track bed was re-cut and redone to add strength to the model.
You will need to add some extruded aluminum rails to the bottom of the bridge to make it strong enough for HO trains.
You also need to print Top A - 2 times
Print Settings
Printer Brand:
Anycubic
Printer:
Semi-closed 4Max
Rafts:
No
Supports:
Yes
Infill:
20%
Filament:
AMAZ3D PLA
Silver
Category: Buildings & Structures