Gyroscope Beer / Soda Can Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gyroscope for beer or soda cans which have a diameter of 67mm. Stabilize your drinks :)
- Ocena
- 5 / 5
- Polubienia
- 99
- Pobrania
- 421
- Wydruki
- 2
- Wyświetlenia
- 4702
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It uses 18mm M4 screws and 7mm M4 nuts.
I recommend to use nyloc nuts for the outer ring.
There are different attachment options, see the original for more details.
I added a custom rod which lets me insert the holder into my bicycle handlebar (it has an inner diameter of 19mm. I printed it with a stop so I can insert a 7mm M4 nut which will be embedded into the print as attachment point. Just use glue, if you do not know how to insert a nut while printing.
If you don't want to insert this into your handle bar I also added the other attachment options from the original design
Consider this as a quick and dirty remix and not the the best. But it works and it holds my beer pretty well :)
Updates:
- Added a longer holder version for 500 ml cans (not shown on the photos)
- Added a new bottom holder base to fit cans even better
- Added the other attachments supports from the original
Print Notes:
The silver parts are printed with PETG, especially the outer ring and attachment part should be printed with a strong material. The white parts are printed with PLA.